Hisense 55 Inch Smart TV Manual FREE pdf, user guide and instructions. This purpose of this article is to help Hisense users with instructions for installation, configuration and Wi-Fi wireless connection and setup.
This will also highlight on how to print and scan, maintenance, troubleshooting, error codes, etc. Below are a list of most important and basic information about Hisense manaul.
hisense 55 inch smart tv manual & Wireless Network
Connecting to a wireless network
Our built-in wireless LAN adapter supports the IEEE 802.11 b/g/n communication protocols and we recommend that
you use an IEEE 802.11n router. When you play a video over an IEEE 802.11 b/g connection, the video may not play
- You must use the built-in Wireless LAN Adapter to use a wireless network because the set does not support an
external USB network adapter.
- To use a wireless network, your TV must be connected to a wireless IP sharer. If the wireless IP sharer supports
Dynamic Host Configuration Protocol (DHCP), your TV can use a DHCP or static IP address to connect to the
- Select a channel for the wireless IP sharer that is not currently being used. If the channel set for the wireless IP
sharer is currently being used by another device nearby, this will result in interference and communication failure.
- If you apply a security system other than the systems listed below, it will not work with the TV.
- If Pure High-throughput (Greenfield) 802.11N mode is selected and the Encryption type is set to WEP, TKIP or
TKIP-AES (WPS2 Mixed) for your Access Point (AP), then the TV will not support a connection in compliance with
these Wi-Fi certification specifications.
- If your access point (AP) supports Wi-Fi Protected Setup (WPS), you can connect to the network via Push Button
Configuration (PBC) or PIN (Personal Identification Number). WPS will automatically configure the SSID and WPA
key in either mode.
hisense tv remote control manual
How to connect Hisense Smart TV to AV device
This type of connection supports digital connections between HDMI-enabled AV devices such as a Personal Video Recorder(PVR), DVD, AV receiver and digital devices. The HDMI version 1.4 inputs are great for any of your external devices that support a standard full high-definition resolution of 1080p.
Please refer to the User Manual that came with your device for step-by-step instructions. To connect an AV device with an HDMI cable (not provided):
- Use an HDMI cable to connect the HDMI output port of the AV device to the HDMI port of the TV.
- Plug the connected devices into the HDMI port on the TV before switching it on.
- Using your remote, select the Inputs icon in Home screen and select the corresponding HDMI input.
Connecting Hisense Smart tv to a USB device
You can connect the USB devices such as hard drives, USB sticks and digital cameras for browsing photos, listening to music and watching recorded videos.
- Connect a USB device into the USB port.
- Select the content you want to play or view.
hisense tv service manual
- When connecting a hard disk or a USB hub, always connect the mains adapter of the connected device to the
power supply. Exceeding a total current consumption may result in damage. The USB1.1 and USB2.0 devices
maximum current consumption are 500mA.
- For individual non-standard high-capacity mobile hard disk, if its impulse current is greater than 500mA, it may
cause TV-rebooting or self-locking. So the TV does not support it.
- The USB port supports a voltage of 5V
This article is all about Hisense 55 Inch Smart TV Manual and Epson xp-640 Wifi setup guide. If you have any more questions please using the contact details and don’t forget to share with friends.