Get a free soft copy of the Frigidaire Gallery Dishwasher Manual pdf also called user guide. This user manual works as a guide and direction for users easily navigate troubleshoot and do basic setups.
frigidaire gallery dishwasher error codes
|HO||Heat Delay (Low Water Temperature)||Cycle is delayed until hot water temperature rises.|
|LO||Low Rinse Aid||Refill rinse aid dispenser.|
|PF||Power Failure||Possible power outage. Open and close door to reset.|
|i20, i40, iF0||Restricted drain line||Clean filters, check drain hose|
|i30||Bottom pan leak||Check hose connections, level unit|
|i50||Drain or wash motor failure||Restart unit: press and hold the cancel button or turn off power at breaker|
|i60||Water heating system failure||Restart unit: press and hold the cancel button or turn off power at breaker|
|iC0||Electronic control system failure||Restart unit: press and hold the cancel button or turn off power at breaker|
|UO||Vent open||Check vent assembly and wiring|
|UF||Vent Failure (Fan not running)||Check vent assembly and wiring. Replace vent fan.|
|ER||Membrane Switch Failure / Stuck Key||Check wiring connections between keypad and Main Control Board|
|CE||Configuration Error||Check wiring connections between keypad and Main Control Board|
|CL||Close Door (Door Switch Open)||Check door switches. Check wiring between door switches and Main Control Board|
|dP||Drain Pump||Displayed in relay test when drain pump is activated|
|FL||Water valve open||Displayed in relay test when water valve is activated.|
|hs||Hall Sensor Error||Check wiring between motor and Main Control Board. Replace motor.|
|rA||Rinse Aid Reed Switch Failure||Refill the rinse aid dispenser. If error still exist, check wiring between dispenser and Main Control Board. Replace dispenser assembly.|
|RE||Rinse Aid Reed Switch||Rinse aid reed switch in dispenser is closed.|
|RF||Rinse aid reed switch||Rinse aid reed switch in dispenser is open. Refill rinse aid dispenser. Replace dispenser assembly.|
|rt||Relay / Triac Test||Relay test mode has been activated.|
|Sd||Detergent Dispenser||Displayed in relay test mode when detergent dispenser is activated.|
|tu||Turbidity Sensor Failure||Check wiring between turbidity sensore and Main Control Board. Replace turbidity sensor.|
Why is my dishwasher flashing ER?
Troubleshooting a Broken Frigidaire Dishwasher
This quick troubleshooting guide takes you through some easy steps to determine the above issues and solve the problem:
- Check your circuit breaker and power connection to make sure the dishwasher is receiving power.
- Make sure the water supply is on and providing adequate pressure.
- Double-check your settings to make sure the delayed start and child lock features are inactivated.
- Always close the door immediately after selecting a cycle. A delay in closing the door could require you to repeat your selection.
- Adding a forgotten item mid-cycle could also require you to restart a cycle.
- Make sure the dishwasher door is properly closed.
Check Other manuals